Ready for installation and without drilling, the SEAMAID above-ground projector is suitable for all above-ground pools with rigid walls.
Easy to install, it screws directly on the 1.5" female thread inlet nozzle of your swimming pool.
Available in cold white 14W or RGB lighting 10W to give your basin the color you want!
INTRODUCTION：
Sold with a ‘ready-to-install’ kit case, this projector for above ground hard-wall pools can be fitted directly onto your pool’s outlet fitting.
Available with white or coloured lighting, it will light up your whole pool!
With a low energy consumption and a long lifespan, LEDs are not only ecologically friendly but are also an affordable long-term solution. That means they are the perfect choice of lighting for enjoying your pool all night long!
SPECIFICATIONS：
|
Ref |
Size |
Colour |
Luminous power |
LED number |
Power |
|
500699 |
h350 mm |
RGB with remote control |
320lm max |
36 |
10 WATTS |
|
501498 |
h350 mm |
White |
1000lm |
18 |
14 WATTS |
IDEAS AND RECOMMENDATIONS:
Easy to install: Simply remove the cover before unscrewing the outlet fitting nozzle. Place the projector’s plate against the wall fitting and screw the nozzle back on. If the nozzle model you are using is unsuitable, use the adaptor provided. Feed the cable under the edge and connect it to the mains.
Lay the cable under the edge to prevent it from coming loose.
When using for the first time, it is necessary to pair the remote control provided with the projector.
To pair easily, connect the transformer to a multi-socket with an on/off switch.
Regulation safety distances must be respected at all times and the main power supply must not be closer than 3.50 meters from the water.
PICTURES：
